Less Bleeding Endovenous Laser Ablation Machine

Less Bleeding Endovenous Laser Ablation Machine 30 watts 980nm
 
EVLA is a new method of treating varicose veins without surgery. Instead of tying and removing the abnormal veins,they are heated by a laser. The heat kills the walls of the veins and the body then naturally absorbs the dead tissue and the abnormal veins are destroyed. It can be carried out in a simple treatment room rather than an operating theatre.
 
 
Advantages for 980nm diode laser for vascular veins:  
1. The advanced laser technology for red blood veins/vascular/spider veins removal in contrast with high frequency in the market
2. 1-15W adjustable energy to satisfy different requirements
3.Three modes: CW Pulse ,Pulse ,and Single for optional
4.Short time operation, no injury, no bleeding, no burning, redness or scar
5.The obvious effectiveness: Only one or two treatments are required
 
What does Endovenous Laser Ablation procedure involve?
An ultrasound scan is performed and the veins to be treated are marked with a pen. You lie on a couch and your leg is cleaned and covered with drapes. Depending on which veins are to be treated, you may be on your back or your front. All these steps are guided by ultrasound scanning.
Endovenous means inside the vein, so the next thing the doctor has to do is to get inside your vein. A small amount of local anaesthetic is injected into the skin over the vein and a needle inserted into it. A wire is passed through the needle and up the vein. The needle is removed and a catheter (thin plastic tubing) is passed over the wire, up the vein and the wire removed.
A laser fibre is passed up the catheter so its tip lies at the highest point to be heated (usually your groin crease). A large quantity of local anaesthetic solution is then injected around the vein through multiple tiny needle pricks. All staff and the patient put on laser safety specs as a precaution. The laser is then fired up and pulled down the vein over about 5 minutes. You will hear a warning buzzer ringing and may smell or taste burning but won’t feel any pain. If you're having both legs treated the process is repeated on the other leg. The laser and catheter are removed and the needle puncture covered with a small dressing.
The treatment takes about 20-30 minutes per leg. You may also have some foam sclerotherapy or some avulsions undertaken and a compression stocking is then put on.

Laser Name    CHERYLAS
Laser Type    GaAlAs Diode Laser
Wavelength    810nm/ 980nm/ 1210nm/ 1470nm
Maximum Power    15W/ 30W/ 60W
Operation Mode    CW, Single Or Repeat Pulse
Pulse Duration    10us- 3s
Repetition Rate    0.2Hz- 50KHz
Pilot Beam    Red Diode Laser Of 650nm, Power<5mW
Control Mode    True Color Touch Screen
Transmission System    Medical Fibers With SMA905 Connector
Dimensions    380(W)*430(L)*220(H) mm
Weight    11Kg